7,540
edits
Changes
→Layouts
<br>
== Angled Sloped wall + straight railing around the balcony ==
There are things you can't do with a built-in feature in CA. In this case, we have to improvise or model the given shape by hand. Eg the corner railing element shown in the picture below with the sloping wall, but above it the straight railing cannot be solved with the built-in tools. '' 'Bold text' ''
: [[File: ClipCapIt-210408-213101.PNG]]
<br>
<br>
== Stone fence with garden gate ==
Here is the full step-by-step description: https://www.chiefarchitect.com/support/article/KB-00874/placing-a-gate-in-a-terrain-wall.html
This is necessary in order to be able to give it a different floor structure than the living room has.
=== The walls run down to the bottom row basement ===
: [[File: ClipCapIt-210528-235935.PNG]]
Care must be taken that the three walls shown in the picture do not go all the way down to the basement, only to the ground floor. To do this, do two 'Cross sections', then grab the bottom of the walls and pull them to the desired height up to the ground floor level:
=== Sloping wall at in the top of the ladder stairwell ===
: [[File: ClipCapIt-210529-000540.PNG]]
The CA can follow the wall with the ladder at the edges of the stairs, but not between the two steps. That’s why I put the triangle on top of a 3D box that I covered with the wall material.
== Layout overview==
=== Create ===
The layout is always created from a layout template. Then we can send different views of the plan to any page of the layout. You can create multiple layouts for a plan. The layout is an independent file that we saved separately to the plan, so it is not part of the plan file. That is, every decent project contains at least one plan and one layout extension file, and the plan and layout live separately.