7,540
edits
Changes
→Staircase
This is necessary in order to be able to give it a different floor structure than the living room has.
=== The walls run down to the bottom row basement ===
: [[File: ClipCapIt-210528-235935.PNG]]
Care must be taken that the three walls shown in the picture do not go all the way down to the basement, only to the ground floor. To do this, do two 'Cross sections', then grab the bottom of the walls and pull them to the desired height up to the ground floor level:
=== Sloping wall at in the top of the ladder stairwell ===
: [[File: ClipCapIt-210529-000540.PNG]]
The CA can follow the wall with the ladder at the edges of the stairs, but not between the two steps. That’s why I put the triangle on top of a 3D box that I covered with the wall material.